 Vinyl flooring adhesive (by Sean Barsky [CT]) May 17, 2026 2:09 PM
 (by Deanna [TX]) May 17, 2026 3:13 PM
(by Just Tim [AR]) May 17, 2026 3:27 PM
(by Just Tim [AR]) May 17, 2026 3:30 PM
(by zero [IN]) May 17, 2026 4:09 PM
(by plenty [MO]) May 17, 2026 4:38 PM
(by JS [CA]) May 17, 2026 8:50 PM
(by Robert J [CA]) May 17, 2026 11:33 PM
(by zero [IN]) May 18, 2026 8:14 AM
Click here to reply to this discussion.
 Click Here to send this discussion to a friend
Vinyl flooring adhesive (by Sean Barsky [CT]) May 17, 2026 2:09 PM
Message:
Hi everyone, redoing floors in my apartment. I ran into a flooring guy recently who was doing a commercial office install of vinyl planks with an adhesive he was troweling on. Looked very nice. I told him that I've done the home depot ones and he said what he was using would last a very long time in a multi family. You folks ever go with a commercial product like that? I'll do the install myself. Any replies will be greatly appreciated, thanks --24.147.xxx.xx |
Vinyl flooring adhesive (by Deanna [TX]) May 17, 2026 3:13 PM
Message:
With my very first reno, we tried using adhesive with vinyl tiles, but the adhesive would squish up through the seams and attract dirt. I'm sure a pro is much better than we were, but that would be the one thing I would figure out what we did wrong and not repeat if I ever used adhesive in the future. --172.59.xxx.xx |
Vinyl flooring adhesive (by Just Tim [AR]) May 17, 2026 3:27 PM
Message:
It was most likely a pressure sensitive glue. If you are buying glue-down plank, your supplier should stock the glue. If not, you may be able to find Mapei 373 or 399 at a box store. --68.1.xxx.xxx |
Vinyl flooring adhesive (by Just Tim [AR]) May 17, 2026 3:30 PM
Message:
On my first read of your post, I read it as you were only asking about the adhesive. If you are looking for the glue-down plank, you can get it through most flooring stores. Most in my area have moved more to floating floors for stock, but they can still order the glue-down if that's what you want. --68.1.xxx.xxx |
Vinyl flooring adhesive (by zero [IN]) May 17, 2026 4:09 PM
Message:
Using the correct adhesive is very important. Also making sure that you put it down correctly as well as waiting the right amount of time before install.
When I was still doing it I used pressure sensitive (releasable) glue, as mentioned above. I troweled it on and usually let it sit, sometimes overnight, to be sure it was ready.
The stuff I used would turn opaque when it was cured enough to lay tiles on. Make sure that you roll the tiles out when you lay them to get them in the adhesive and to be sure there are no air bubbles.
I use click stuff now as it goes down easier for me and I don't have the extra steps with the adhesive. --47.227.xx.xxx |
Vinyl flooring adhesive (by plenty [MO]) May 17, 2026 4:38 PM
Message:
Yes I've used commercial flooring in my own home and rentals. It does look nice and last long time. Takes abuse. Yes they were glue down squares. Stone looking. I have sold all the homes I've used this product in over the years. Image one gets tired of the color before the wear. Check out flooring in commercial buildings you visit. Then find that product. Material Cost more but labor is the same --172.59.xxx.xx |
Vinyl flooring adhesive (by JS [CA]) May 17, 2026 8:50 PM
Message:
The prep work on the floor the adhesive would keep me away. My laminate floors last over 10 years. The tile floors look like they will still be good when I’m a memory. I mostly just do laminate now but the higher quality ones. A few of my cheaper ones are still over 15 years old and I’m sure I paid under $1 / sq ft. I am hoping the newer ones last even longer since they are water resistant. --162.204.xxx.xxx |
Vinyl flooring adhesive (by Robert J [CA]) May 17, 2026 11:33 PM
Message:
I've been using and installing various Vinyl, Luxury Vinyl Plank and Laminate flooring for years, going back over 30 years. I've used these products in Single Family Homes, Apartments (A, B, C and lower locations/tenants) and some industrial rentals (Dentist, Doctor and Accountant tenants).
The Number 1 concern is how will it hold up AND how easily it can be replaced if damaged. When the product is "Glued Down" to the sub-flooring, it is harder to remove and replace (repairs). Even though I had spot sanders and scrapers, glue down causes extra work. But not having a floor glued down, such as in a Hallway, the Planks start to slide and create spacing.
Unless you have a floor suction cup and mallet to tape the planks back in place, this could create a problem. Because of water, moisture and tenant mistakes, I try not to glue anything down, except for 1 piece vinyl flooring, like top quality Armstrong with a 20 year guaranty. --47.155.xx.xxx |
Vinyl flooring adhesive (by zero [IN]) May 18, 2026 8:14 AM
Message:
Good luck getting that warranty to work when they find out it is a rental.
I was gluing 1 foot squares down because I could not get sheet vinyl that was big enough without seams.
Once I tried LVP the first time I was sold and have not gone back.
I have yet to replace any of the LVP so I can't say as to how tough it will be. All of mine are click lock. I really do not see being able to undo half a room to fix a tile and then get them all to fit back correctly.
Most do not just drop in on all four sides and need a little tap with a block and hammer. I would say that stretches or crushes the lips a little after a while. --47.227.xx.xxx |
Click Here to send this discussion to a friend
Report discussion to Webmaster
Reply:
|
|
